What is the Climb-N-Challenge? In short it is a challenge course / rope course that is vertical instead of horizontal. The upper fame is designed to accept several different interchangeable elements that are challenging yet achievable. The standard configuration utilizes 3 different elements, starting from the bottom going upwards: "Tremor Ladder", "Tire Climb" and finally the "THE WALL".
Theme: The standard build has an Adventure camp feel. The trailer and the steel tower are powder coated Tan. We are highlighting each climbing route with different colors of ropes and handholds. This will make it easier for the operator to tell the participants what route may be best for them to try. Custom colors and themes are possible.
Tremor Ladder: this is a ladder that is made out of 1 ½ " tube steel spaced unevenly apart with cable, making the simple task of climbing a ladder a bit more challenging. (Beginner will have more steps and closer together; we make it more challenging for the Inter, adv routes)
Tire Climb: We connect automobile tires together with cable and the climber must climb over and on top of them to the top. (Beginner will have 4 tires and the intermediate will have 3 tires and the advanced route will have only 2 tires)
"THE WALL": Just like all the military training centers we are placing a flat wall (this flat wall is made out of a recycled wood material called "TREX"). Weather and wear resistant, handholds will be installed into the TREX with T-nuts) on the top 8' sections with small handholds to help you get some traction as you use the thick knotted climbing rope to pull yourself upwards to the top. This is a great element, and will draw tons of attention during events.
What makes this product so AWESOME? It is based on our climbing walls that are tried and tested for years. We use our Auto-Belay safety system, so the climbers are completely secured and safe at all times.
Quality: We are upholding all of our QC standards, ASTM and building to our Engineer's Specs. This new product will come into the market with the advantage that it is a well built product coming from a well established company known for our innovation, quality and service.
Service: This product will require that the cables on the AB are replaced annually. Along with a couple other wear items that are listed in the Owner's manual. Always follow the inspection checklist in the owner's manuals.
Exhilarating elements to climb on
Single and Dual axle trailers with electric brakes
Powder coat on steel, custom colors available
Hydraulic lift system to stand the tower vertical in place
15 minute set-up time
Auto-Belay safety systems (Generation 4) unique to Spectrum Sports Intl and most trusted in industry (CE and TUV approved)
35 mph wind rating
Push button Hydraulic lift for easy and quick setup / take-down
Drop & Go compatible for indoor use without the trailer
Made in the USA 100%
3 climbing zones
3 Elements on each climbing zone
Travel Dimensions: 28'10"L x 6'4"W x 9'5"H (874cm L x 195cm W x 286cm H)
Operating Dimensions: 29'10"L x 7'6"W x 24'6"H (908cm L x 228cm W x 747cm H)
3500 lbs (2177kg) total weight
350 lbs (158kg) tongue weight
2" ball bumper pull hitch
7-Prong Electrical Plug
Full size spare tire
1(Qty) 5000 lbs (2268kg) torsion axle
Electrical trailer brakes on axle
NOTE: PLEASE ALLOW 6' (1.8M) of clearance around base of the wall for a "Climbing Zone."